BCLWV - DITZLER POLISHING COMPOUND,DRX25

  • MSDS: BCLWV
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: DITZLER POLISHING COMPOUND,DRX25
  • National Stock Number: 7930-00N006073
Product Identification

Product ID:DITZLER POLISHING COMPOUND,DRX25
MSDS Date:01/01/1985
FSC:7930
NIIN:00N006073
MSDS Number: BCLWV

Responsible Party
PPG INDUSTRIES,INC

Emergency Phone: 412-434-3131

Cage: GO796

Contractor
PPG INDUSTRIES,INC. COATINGS TRESINS DIV.
PITTSBURGH, PA 15272 US

Telephone: 304-843-1300

Cage: GO796

Ingredients

PETROLEUM DISTILLATES (NAPHTHA OR RUBBER SOLVENT)

CAS: 8002-05-9

RTECS: SE7449000

Fraction By Weight: 25%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM; 8990

Hazards

Effects of Overexposure:EYE/SKIN: IRRIT. VAPORS: ANESTHETIC,IRRIT OF
RESP TRACT,ACUTE NERVOUS SYSTEM DEPRESSION,COMA

First Aid

First Aid:EYE: FLUSH WITH WATER 15 MINUTES,CONSULT PHYSICIAN. WKIN:
WASH WITH WATER,REMOVE CONTAMINATED CLOTHING,CONSULT PHYSICIAN.
INHALATION: REMOVE FROM EXPOSURE,RESTORE BREATHING,CONSULT
PHYSICIAN.

Fire Fighting

Flash Point:170F/76C (PMCC)
Extinguishing Media:CARBON DIOXIDE,DRY CHEMICAL,FOAM
Fire Fighting Procedures:SELF-CONTAIN BREATH APP,WATER FOG TO COOL
EXPOSED CONTAINERS
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:REMOVE SOURCES OF IGNITION,AVOID BREATHING
VAPORS,VENTILATE AREA. REMOVE WITH INERT ABSORBENT AND NON-SPARKING
TOOLS.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F/48C. GROUND
CONTAINER WHEN POURING,AVOID FREE FALL IN EXCESS OF FEW INCHES. DO
NOT TAKE INTERNALLY. CLOSE CONTAINER AFTER USE.
Other Precautions:AVOID PROLONGED OR REPEATED CONTACT WITH SKIN &
BREATHING VAPOR OR SPRAY MIST. READ LABEL. CAUTION COMBUSTIBLE.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:LOCAL/MECHANICAL TO MAINTAIN BELOW TLV
Protective Gloves:REQUIRED
Eye Protection:SPLASH GOGGLES
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:340F/171C
Vapor Density:>1
Evaporation Rate & Reference:<1 (ETHER)
Percent Volatiles by Volume:34

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CARBON MONOXIDE

Disposal

Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.